Frontal shower screen with 2 fixed panels and 2 sliding doors of avant-garde design, absence of profiles giving prominence to its 10 and 8mm glass with anti-limescale treatment. Stabilizer bar, profiles, and other components in polished bright stainless steel. Immediate delivery.

TYPE OF PROFILES
Stainless steel profiles treated with a process known as mirror polishing (brightness comparable to that of chrome plating) which makes them easier to clean.

ADJUSTMENT AND COMPENSATION PROFILES
The vertical profiles of the shower screen allow for the adjustment of the screen and enable us to adapt it correctly to the conditions of the installation, compensating for any possible unevenness in the walls and adjusting to the necessary light opening.
Specifically, the width of the fixed glass profile is 2.4 cm, which will allow us to compensate for any unevenness that may exist in the walls of our shower tray or bathtub. The Vetrum model is available in stock in established standard measurements and with ranges that allow us to adapt to the opening (see Vetrum model tables in the catalog).
These ranges are achieved by adapting the lower water deflector to the necessary measurement and with a greater or lesser overlap of the door over the fixed panel (1-6 cm). Therefore, during installation, it will be necessary to cut the lower water deflector to adapt it to our opening, for which a cutting saw for steel will suffice.

GLASS AND DECORATIONS
GME only works with tempered glass screens. Tempered glass is a type of safety glass, processed with thermal or chemical treatments to increase its strength compared to normal glass. Tempered glass, when broken, shatters into many small pieces instead of splintering into large jagged fragments. These tiny pieces are less likely to cause injury.
This shower screen has 8 mm thick tempered safety glass in the sliding panel and 10 mm thick in the fixed panel.
Another decoration option is our adhesive vinyls (delivery time 7 days) or the possibility of digital printing (delivery time 20 days).

OPENING
The opening system is by sliding panels, which are provided with bearings that slide along the fixed glass and the lower metallic water deflector.

CLOSING SYSTEM
The closing system of the shower screen is by magnetic closure, which provides great convenience and watertightness when closing the screen.

WATERTIGHTNESS
The shower screen has a vertical water deflector rubber to guarantee watertightness in the gap between the sliding panel and the fixed glass.
The shower screen has no guide in the lower part of the screen; it only has a metallic water deflector on the shower tray (1.8 cm high and 0.8 cm wide) where the bearing runs.