PROFILE TYPE
Stainless steel profiles treated with a process known as mirror polishing (gloss comparable to chrome plating) which makes them easier to clean.

ADJUSTMENT AND COMPENSATION PROFILES
The vertical profiles of the shower screen allow for adjustment of the screen and enable it to be correctly adapted to the site conditions, compensating for any unevenness that may exist in the walls and adjusting to the necessary light opening.
Specifically, the width of the fixed glass profile is 2.4 cm, which will allow us to compensate for any unevenness that may exist in the walls of our shower tray or bathtub. The Moving model is available in stock in established standard measurements and with ranges that allow us to adapt to the opening (see tables in the catalog).
These ranges are achieved by adapting the upper rail to the necessary measurement and with a greater or lesser overlap of the door over the fixed panel (1-6 cm). Therefore, during installation, it will be necessary to cut the upper rail to adapt it to our opening; for this, a steel cutting saw will suffice.

GLASS AND DECORATIONS
GME only works with tempered glass screens. Tempered glass is a type of safety glass, processed with thermal or chemical treatments to increase its strength compared to normal glass. When tempered glass breaks, it shatters into many small pieces instead of splintering into large jagged fragments. These tiny pieces are less likely to cause injury.
This shower screen has 8 mm thick tempered safety glass.
The screen can be decorated with our adhesive vinyls or with the possibility of digital printing.

OPENING
The opening system is via sliding panels, which are equipped with bearings that slide along the upper bar.

CLOSING SYSTEM
The shower screen's closing system is magnetic, which provides great comfort and watertightness when closing the screen.

WATERTIGHTNESS
The shower screen has vertical water deflector gaskets to ensure watertightness in the gap between the sliding panel and the fixed glass.
The shower screen lacks profiles in the lower part of the screen, so, to provide good watertightness, we must install a water deflector gasket at the bottom of the slider and a metallic water deflector on the shower tray (0.9x0.9 cm).